BRAKE PEDAL (for LHD) > REASSEMBLY |
| 1. INSTALL BRAKE PEDAL PAD |
| 2. INSTALL BRAKE PEDAL BUSHING |
Apply lithium soap base glycol grease to 2 new brake pedal bushings.
Install the 2 brake pedal bushings to the brake pedal sub-assembly.
| 3. INSTALL BRAKE PEDAL SHAFT COLLAR |
Install the brake pedal shaft collar to the brake pedal sub-assembly.
| 4. INSTALL BRAKE PEDAL SUB-ASSEMBLY |
![]() |
Install the brake pedal sub-assembly to the brake pedal support sub-assembly with the brake pedal shaft and nut.
| 5. INSTALL BRAKE PEDAL STROKE SENSOR ASSEMBLY |
When installing a new brake pedal stroke sensor assembly:
![]() |
Temporarily install a new brake pedal stroke sensor assembly with the 2 nuts.
| *1 | Brake Pedal Groove |
| *2 | Brake Pedal Stroke Sensor Assembly Lever |
When reusing the brake pedal stroke sensor assembly:
![]() |
Temporarily install the brake pedal stroke sensor assembly with the 2 nuts.
| *1 | Brake Pedal Groove |
| *2 | Brake Pedal Stroke Sensor Assembly Lever |