Home › Steering › POWER ASSIST SYSTEMS › POWER STEERING ECU

POWER STEERING ECU > REMOVAL

for Preparation Click here



1. REMOVE UPPER INSTRUMENT PANEL ASSEMBLY

HINT:
Refer to Removal of the upper instrument panel assembly (Click here).



2. REMOVE POWER STEERING ECU ASSEMBLY


    C206234E01
  1. Disengage the wire harness clamp from the power steering ECU assembly.
    Text in Illustration 
    *1
    Lock of the Lock Lever
    *2
    Lock Lever

  1. Disconnect the connector from the power steering ECU assembly.

    HINT:
    As shown in the illustration, pull out the lock of the lock lever and turn the lock lever to disconnect the connector.



    C206236
  1. Disconnect the 3 connectors from the power steering ECU assembly.



    C206237
  1. Remove the bolt, 2 nuts, and the power steering ECU assembly.