REAR SEAT ASSEMBLY > INSTALLATION |
| 1. INSTALL REAR SEATBACK ASSEMBLY RH |
Place the rear seatback assembly RH in the cabin.
![]() |
Install the rear seatback assembly RH with the 2 bolts.
![]() |
Engage the fastener.
| *1 | Fastener |
| 2. INSTALL REAR SEATBACK ASSEMBLY LH |
Place the rear seatback assembly LH in the cabin.
![]() |
Install the rear seatback assembly LH with the 2 bolts.
![]() |
Engage the fastener.
| *1 | Fastener |
| 3. INSTALL REAR SEAT CENTER HEADREST ASSEMBLY |
![]() |
Install the rear seat center headrest assembly as shown in the illustration.
| 4. INSTALL REAR SEAT HEADREST ASSEMBLY RH |
![]() |
Install the rear seat headrest assembly RH as shown in the illustration.
| 5. INSTALL REAR SEAT HEADREST ASSEMBLY LH |
![]() |
Install the rear seat headrest assembly LH as shown in the illustration.
| 6. CONNECT REAR CENTER SEAT BELT ASSEMBLY |
![]() |
Connect the anchor part of the rear seat inner belt assembly.
| *1 | Protruding Part |
| 7. INSTALL REAR SIDE SEATBACK ASSEMBLY RH |
![]() |
Engage the 2 guides as shown in the illustration.
![]() |
Install the rear side seatback assembly RH with the bolt.
| 8. INSTALL REAR SIDE SEATBACK ASSEMBLY LH |
![]() |
Engage the 2 guides as shown in the illustration.
![]() |
Install the rear side seatback assembly LH with the bolt.
| 9. INSTALL REAR SEAT CUSHION ASSEMBLY |
![]() |
Engage the 2 guides of the seat cushion to the seatback.
| *1 | 100 mm (3.94 in.) or less |
| *2 | Guide |
| *3 | Hook |
Engage the 2 front hooks of the seat cushion to the vehicle body.