REAR SEAT ASSEMBLY > DISASSEMBLY |
| 1. REMOVE REAR SEATBACK COVER LH |
![]() |
Disengage the 4 claws and remove the rear seatback cover LH.
| 2. REMOVE REAR SEAT SHOULDER BELT GUIDE LH |
![]() |
Remove the 2 screws.
Disengage the guide and remove the rear seat shoulder belt guide LH.
| 3. REMOVE REAR SEATBACK STOP BUTTON GROMMET |
![]() |
Disengage the 3 claws and remove the rear seatback stop button grommet.
| 4. REMOVE REAR SEATBACK COVER WITH PAD LH |
![]() |
Using a clip remover, remove the 2 clips.
Disengage the 6 clips.
![]() |
Remove the 13 hog rings.
![]() |
Disengage the 4 claws and remove the 2 rear seat headrest supports.
Remove the rear seatback cover with pad LH from the rear seatback frame sub-assembly LH.
| 5. REMOVE SEPARATE TYPE REAR SEATBACK COVER LH |
![]() |
Remove the 9 hog rings.
| 6. REMOVE REAR SEATBACK LOCK RELEASE BUTTON LH |
![]() |
Remove the rear seatback frame LH from the rear seatback lock release button LH as shown in the illustration.
| 7. REMOVE REAR SEATBACK LOCK ASSEMBLY LH |
![]() |
Remove the 2 bolts and rear seatback lock assembly LH.
| 8. REMOVE REAR SEATBACK CENTER COVER (for LHD) |
![]() |
Disengage the 4 claws and remove the rear seatback center cover.
| 9. REMOVE REAR SEATBACK COVER RH |
![]() |
Disengage the 4 claws and remove the rear seatback cover RH.
| 10. REMOVE REAR SEAT SHOULDER BELT GUIDE RH |
![]() |
Remove the 2 screws.
Disengage the guide and remove the rear seat shoulder belt guide RH.
| 11. REMOVE REAR SEATBACK STOP BUTTON GROMMET |
![]() |
Disengage the 3 claws and remove the rear seatback stop button grommet.
| 12. REMOVE CENTER ARMREST HINGE COVER |
![]() |
Using a screwdriver wrapped with protective tape, disengage the claw and remove the center armrest hinge cover as shown in the illustration.
| *1 | Protective Tape |
| 13. REMOVE REAR SEAT CENTER ARMREST ASSEMBLY |
![]() |
Remove the bolt and bush.
Separate the pin and remove the center armrest assembly.
![]() |
Remove the bush.
| 14. REMOVE REAR SEATBACK COVER WITH PAD RH |
![]() |
Using a clip remover, remove the 3 clips.
Disengage the 6 clips.
![]() |
Remove the 16 hog rings.
Disengage the guide and remove the rear seat shoulder belt guide RH.
![]() |
Disengage the 2 claws and remove the seat belt anchor cover cap.
![]() |
Move the rear seat shoulder belt hole cover in the direction indicated by the arrow in the illustration to disengage the 2 claws (A).
Move the rear seat shoulder belt hole cover in the direction indicated by the arrow in the illustration to disengage the 2 claws (B) and remove the cover.
![]() |
Disengage the 4 claws and remove the 2 rear seat center headrest supports.
![]() |
Disengage the 4 claws and remove the 2 rear seat headrest supports.
Remove the rear seatback cover with pad RH from the rear seatback frame sub-assembly RH.
| 15. REMOVE REAR CENTER SEAT BELT ASSEMBLY |
![]() |
Remove the nut and rear center seat belt assembly.
| 16. REMOVE SEPARATE TYPE REAR SEATBACK COVER RH |
![]() |
Remove the 7 hog rings.
![]() |
Remove the 9 hog rings.
Remove the separate type rear seatback cover RH.
| 17. REMOVE REAR SEATBACK LOCK RELEASE BUTTON RH |
![]() |
Remove the rear seatback frame RH from the rear seatback lock release button RH as shown in the illustration.
| 18. REMOVE REAR SEATBACK LOCK ASSEMBLY RH |
![]() |
Remove the 2 bolts and rear seatback lock assembly RH.
| 19. REMOVE BENCH TYPE REAR SEAT CUSHION COVER |
Remove the 28 hog rings.

Remove the 14 hog rings and rear seat cushion cover.
