HOOD > DISASSEMBLY |
| 1. REMOVE HOOD AUXILIARY CATCH HOOK ASSEMBLY |
![]() |
Remove the 2 bolts and hood auxiliary catch hook assembly.
| 2. REMOVE HOOD INSULATOR |
![]() |
Using a clip remover, remove the 6 clips and hood insulator.
| 3. REMOVE WASHER NOZZLE SUB-ASSEMBLY |
![]() |
Using a screwdriver, disengage the 2 claws and separate the washer nozzle sub-assembly as shown in the illustration.
| *1 | Protective Tape |
![]() |
Remove the washer nozzle sub-assembly from the washer hose.
| 4. DISCONNECT WASHER HOSE ASSEMBLY |
![]() |
Using a clip remover, disengage the 6 clips and disconnect the washer hose assembly.
| 5. REMOVE HOOD STAY HOLDER |
![]() |
Disengage the 2 claws and remove the hood stay holder.
| 6. REMOVE HOOD SUPPORT ROD |
![]() |
Disengage the 3 claws and remove the hood support rod.
| 7. REMOVE HOOD STAY BRACKET |
![]() |
Remove the bolt and hood stay bracket.