Home › Engine / Hybrid System › 2ZR-FXE ENGINE CONTROL › ENGINE COOLANT TEMPERATURE SENSOR

ENGINE COOLANT TEMPERATURE SENSOR > REMOVAL

for Preparation Click here



1. REMOVE EGR WITH COOLER PIPE SUB-ASSEMBLY
  1. Remove the EGR with cooler pipe sub-assembly (Click here).



2. REMOVE RADIATOR WITHOUT CAP RESERVE TANK ASSEMBLY


    A212304
  1. Remove the 2 bolts and separate the radiator without cap reserve tank assembly.



3. REMOVE ENGINE COOLANT TEMPERATURE SENSOR
  1. Disconnect the engine coolant temperature sensor connector.



    A216695
  1. Remove the engine coolant temperature sensor.