THROTTLE BODY > REMOVAL |
| 1. REMOVE FRONT SPOILER COVER (w/ Front Spoiler) |
| 2. REMOVE ENGINE UNDER COVER |
| 3. DRAIN ENGINE COOLANT (for Engine) |
Loosen the radiator drain cock plug and drain the coolant.
Loosen the cylinder block drain cock plug.

| *1 | Reservoir Tank Cap | *2 | Cylinder Block Drain Cock Plug |
| *3 | Radiator Drain Cock Plug | *4 | Air Release Valve |
| 4. REMOVE NO. 2 CYLINDER HEAD COVER |
![]() |
Remove the 3 clips and No. 2 cylinder head cover.
| 5. REMOVE AIR CLEANER CAP SUB-ASSEMBLY |
![]() |
Disconnect the mass air flow meter connector.
![]() |
Release the 2 clamps.
Loosen the hose clamp and remove the air cleaner cap.
| 6. REMOVE INLET AIR CLEANER ASSEMBLY |
![]() |
Separate the hose from the hose clamp.
Separate the wire harness clamp from the inlet air cleaner assembly.
Remove the 3 bolts and inlet air cleaner assembly.
| 7. REMOVE AIR CLEANER CASE |
Remove the air cleaner filter element.
![]() |
Separate the hose from the 3 hose clamps.
Remove the 3 bolts and air cleaner case.
| 8. REMOVE AIR CLEANER HOSE ASSEMBLY |
![]() |
Loosen the hose clamp and separate the ventilation hose.
Unlock the hose clamp and remove the air cleaner hose assembly.
| 9. REMOVE THROTTLE BODY ASSEMBLY |
![]() |
Disconnect the throttle body connector and the 2 water by-pass hoses.
Remove the 2 bolts, 2 nuts and throttle body assembly.
![]() |
Remove the gasket from the intake manifold.