SERVICE PLUG GRIP > INSTALLATION |
| 1. INSTALL SERVICE PLUG GRIP |
Wear insulated gloves and install the service plug grip in the order shown in the illustration.

Rotate the handle of the service plug grip 90° toward the battery and slide it in the direction shown by the arrow until a click sound is heard.
| 2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 3. INSTALL REAR NO. 3 FLOOR BOARD |
![]() |
Engage the 2 guides to install the rear No. 3 floor board.
| 4. INSTALL REAR DECK FLOOR BOX |
Install the rear deck floor box.
| 5. INSTALL REAR NO. 2 FLOOR BOARD |
![]() |
Engage the 3 guides <A>.
Engage the 2 guides <B> and install the rear No. 2 floor board as shown in the illustration.