Home › Steering › STEERING COLUMN › STEERING PAD SWITCH

STEERING PAD SWITCH > REMOVAL

for Preparation Click here



1. REMOVE STEERING PAD

HINT:
Refer to the instructions for Removal of the steering pad (Click here).



2. REMOVE STEERING PAD SWITCH ASSEMBLY


    C206250
  1. Remove the 2 screws.

  1. Disengage the 2 claws to remove the steering pad switch assembly (RH side) from the steering wheel sub-assembly.



    C206251
  1. Remove the 2 screws.

  1. Disengage the 2 claws to remove the steering pad switch assembly (LH side) from the steering wheel sub-assembly.



3. REMOVE STEERING PAD SWITCH LH


    C258055
  1. Remove the clamp.

  1. Disconnect the connector to remove the steering pad switch LH from the steering pad switch RH.