STEERING WHEEL > REMOVAL |
| 1. PRECAUTION |
| 2. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD |
| 3. REMOVE STEERING PAD |
| 4. REMOVE STEERING WHEEL ASSEMBLY |
![]() |
Remove the steering wheel assembly set nut.
| *1 | Matchmark |
Put matchmarks on the steering wheel assembly and steering main shaft.
Disconnect the connectors from the spiral cable.
![]() |
Using SST, remove the steering wheel assembly.
| *1 | Turn |
| *2 | Hold |
| 5. REMOVE STEERING SHAKE DAMPER |
![]() |
Remove the 2 screws and steering shake damper from the steering wheel assembly.
| 6. REMOVE STEERING PAD SWITCH ASSEMBLY |
Disconnect the steering pad switch connector from the spiral cable sub-assembly.
![]() |
Remove the 2 screws.
Disengage the 2 claws to remove the steering pad switch assembly (RH side) from the steering wheel sub-assembly.
![]() |
Remove the 2 screws.
Disengage the 2 claws to remove the steering pad switch assembly (LH side) from the steering wheel sub-assembly.
| 7. REMOVE CRUISE CONTROL MAIN SWITCH |
![]() |
Disconnect the connector.
![]() |
Remove the 2 screws and cruise control main switch.
| 8. REMOVE CRUISE CONTROL SWITCH WIRE |
| 9. REMOVE LOWER STEERING WHEEL BOSS COVER |
![]() |
Disengage the 2 pins and 4 claws to remove the lower steering wheel boss cover from the steering wheel sub-assembly.