INTELLIGENT PARKING ASSIST SYSTEM > DTC CHECK / CLEAR |
| CHECK DTC |
Connect the intelligent tester to the DLC3.
Turn the power switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Chassis / Intelligent Parking Assist / DTC.
Check the details of the DTCs (Click here).
| CLEAR DTC |
Connect the intelligent tester to the DLC3.
Turn the power switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Chassis / Intelligent Parking Assist / DTC.
According to the display on the intelligent tester, select the trouble code data display with the clear button.