Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › INTELLIGENT PARKING ASSIST SYSTEM

INTELLIGENT PARKING ASSIST SYSTEM > INITIALIZATION

for Preparation Click here



INITIALIZE INTELLIGENT PARKING ASSIST SYSTEM
  1. When "System initializing" message is displayed on the navigation receiver assembly, correct the steering angle neutral point using the following method.

    1. Fully turn the steering wheel to the right and left on the flat ground.

      NOTICE:
      Memorizing the steering angle neutral point must be carried out with the hybrid system started. Apply the parking brake, depress the brake pedal, push the P position switch, and ensure that the vehicle is not moving.

      HINT:
      "?" button is displayed at the same time as "System initializing" message. If the "?" button is selected, this method is displayed.