Home › Vehicle Exterior › WINDOW / GLASS › REAR POWER WINDOW SWITCH

REAR POWER WINDOW SWITCH > INSTALLATION

for Preparation Click here


HINT:
  1. Use the same procedure for the RH side and LH side.
  2. The procedure listed below is for the LH side.



1. INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY


    B229118
  1. Engage the 2 claws to install the rear power window regulator switch assembly.



2. INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR ARMREST BASE PANEL
  1. Connect the connector.



    B228793
  1. Engage the 7 claws and 2 guides, and install the rear power window regulator switch assembly with rear door armrest base panel.



3. INSTALL DOOR ASSIST GRIP COVER


    B228790
  1. Engage the 6 claws, 2 clips and 3 guides, and install the assist grip cover.