Home › Vehicle Interior › POWER OUTLETS (INT) › POWER OUTLET SOCKET

POWER OUTLET SOCKET > REMOVAL

for Preparation Click here



1. REMOVE FRONT CONSOLE BOX COVER


    E239465
  1. Disengage the 6 claws.

  1. Disconnect each connector and remove the front console box cover.



2. REMOVE NO. 3 POWER OUTLET SOCKET ASSEMBLY


    E239466E01
  1. Using a screwdriver, disengage the claw and remove the No. 3 power outlet socket assembly.
    Text in Illustration 
    *1
    Protective Tape

    HINT:
    Tape the screwdriver tip before use.



3. REMOVE NO. 2 POWER OUTLET SOCKET COVER


    E239468
  1. Disengage the 2 claws and remove the No. 2 power outlet socket cover.