TRANSMITTER BATTERY > REPLACEMENT |
| 1. REMOVE TRANSMITTER BATTERY |
![]() |
Push the release hook knob and extract the mechanical key.
![]() |
Insert a precision screwdriver into the gap, and turn the screwdriver to detach the transmitter housing cover.
![]() |
Insert a precision screwdriver into the gap and gently remove the battery (lithium battery: CR1632).
| 2. INSTALL TRANSMITTER BATTERY |
![]() |
Install a new battery (lithium battery: CR1632) with the positive (+) side facing upward, as shown in the illustration.
![]() |
Install the transmitter housing cover by pressing down on it as shown in the illustration.
![]() |
Insert the mechanical key into the transmitter.
Press one of the transmitter switches and check that the LED illuminates.