Home › Vehicle Exterior › WIPER / WASHER › WASHER NOZZLE (for Front Side)

WASHER NOZZLE (for Front Side) > REMOVAL

for Preparation Click here



1. REMOVE WASHER NOZZLE SUB-ASSEMBLY


    E189323E01
  1. Using a screwdriver, disengage the 2 claws and separate the washer nozzle sub-assembly as shown in the illustration.
    Text in Illustration 
    *1
    Protective Tape

    NOTICE:
    1. Be careful not to damage the windshield.
    2. Washer nozzles cannot be reused.

    HINT:
    Tape the screwdriver tip before use.



    E189326
  1. Remove the washer nozzle sub-assembly from the washer hose.