Home › Brake › PARKING BRAKE › PARKING BRAKE SWITCH (for LHD)

PARKING BRAKE SWITCH (for LHD) > INSTALLATION

for Preparation Click here



1. INSTALL PARKING BRAKE SWITCH ASSEMBLY


    C206651
  1. Install the parking brake switch assembly to the parking brake control pedal assembly with the screw.

    Torque:
    3.2 N*m{ 33 kgf*cm , 28 in.*lbf }



2. INSTALL PARKING BRAKE CONTROL PEDAL ASSEMBLY

HINT:
Refer to the procedures from Install Parking Brake Control Pedal Assembly (Click here).