HEADLIGHT CLEANER SWITCH > REMOVAL |
| 1. REMOVE FRONT DOOR SCUFF PLATE LH |
![]() |
Disengage the 10 claws and remove the front door scuff plate LH.
| 2. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH |
![]() |
Remove the clip.
Disengage the 2 clips and remove the cowl side trim sub-assembly LH.
| 3. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY |
![]() |
Remove the screw <C>.
![]() |
Disengage the 6 claws and clip as shown in the illustration.
![]() |
Disengage the claw and 2 guides and disconnect the hood lock control cable.
Disconnect each connector and clamp, and remove the lower instrument panel finish panel assembly.
| 4. REMOVE HEADLIGHT CLEANER SWITCH ASSEMBLY |
![]() |
Disengage the 2 claws and remove the headlight cleaner switch assembly as shown in the illustration.