Home › Vehicle Exterior › WIPER / WASHER › HEADLIGHT CLEANER ACTUATOR COVER

HEADLIGHT CLEANER ACTUATOR COVER > REMOVAL

for Preparation Click here



1. REMOVE HEADLIGHT CLEANER WASHER NOZZLE


    E190129E01
  1. Extend the headlight cleaner washer nozzle.
    Text in Illustration 
    *1
    Protective Tape

  1. Using a screwdriver, disengage the 2 claws and remove the headlight cleaner washer nozzle.

    HINT:
    1. Tape the screwdriver tip before use.
    2. Use the same procedure for the RH side and LH side.