Home › Vehicle Interior › SEAT BELT › FRONT PASSENGER SEAT BELT WARNING LIGHT

FRONT PASSENGER SEAT BELT WARNING LIGHT > INSPECTION

for Preparation Click here



1. INSPECT PASSENGER SEAT BELT WARNING LIGHT ASSEMBLY


B230293E01
  1. Apply battery voltage from the wire harness back side between the terminals of the indicator, and check the lighting condition of the front passenger side seat belt warning light.

    Standard:
    Measurement Condition
    Specified Condition
    Battery positive (+) → Terminal 6 (IG+)
    Battery negative (-) → Terminal 3 (PBEW)
    Front passenger side seat belt warning light comes on

    Text in Illustration 
    *1
    Component without harness connected
    (Passenger Seat Belt Warning Light Assembly)
    If the result is not as specified, replace the passenger seat belt warning light assembly.