Home › Vehicle Interior › LIGHTING (INT) › PERSONAL LIGHT

PERSONAL LIGHT > INSTALLATION

for Preparation Click here



1. INSTALL MAP LIGHT BULB
  1. Install the 2 map light bulbs to the 2 map light sockets.



    E189680
  1. Turn the 2 map light bulbs and 2 map light sockets in the direction indicated by the arrows in the illustration and install them as a unit.



2. INSTALL MAP LIGHT ASSEMBLY (w/o Sliding Roof)
  1. Connect the connector.



    E189674
  1. Engage the 2 guides and 4 clips, and install the map light assembly.



3. INSTALL MAP LIGHT ASSEMBLY (w/ Sliding Roof)
  1. Connect the connector.



    E189672
  1. Engage the 2 guides and 4 clips, and install the map light assembly.



4. INSTALL ROOF TOP MOULDING


    B227833
  1. Engage the 3 claws and 2 clips to install the roof top moulding.