Home › Vehicle Interior › LIGHTING (INT) › PERSONAL LIGHT

PERSONAL LIGHT > REMOVAL

for Preparation Click here



1. REMOVE ROOF TOP MOULDING


    B227832
  1. Using moulding remover B, disengage the 3 claws and 2 clips, and remove the roof top moulding.



2. REMOVE MAP LIGHT ASSEMBLY (w/o Sliding Roof)


    E189673
  1. Disengage the 4 clips and 2 guides as shown in the illustration.

  1. Disconnect the connector and remove the map light assembly.



3. REMOVE MAP LIGHT ASSEMBLY (w/ Sliding Roof)


    E189671
  1. Disengage the 4 clips and 2 guides as shown in the illustration.

  1. Disconnect the connector and remove the map light assembly.



4. REMOVE MAP LIGHT BULB


    E189679
  1. Turn the 2 map light bulbs and 2 map light sockets in the direction indicated by the arrows in the illustration and remove them as a unit.

  1. Remove the 2 map light bulbs from the 2 map light sockets.