Home › Vehicle Interior › LIGHTING (INT) › FRONT DOOR COURTESY SWITCH

FRONT DOOR COURTESY SWITCH > REMOVAL

for Preparation Click here



1. REMOVE FRONT DOOR SCUFF PLATE


    B227761
  1. Disengage the 10 claws and remove the front door scuff plate LH.



2. REMOVE REAR DOOR SCUFF PLATE


    B227766
  1. Disengage the 7 claws and remove the rear door scuff plate LH.



3. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP


    B227768
  1. Remove the front door opening trim weatherstrip LH.



4. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP


    B227770
  1. Remove the rear door opening trim weatherstrip LH.



5. REMOVE CENTER PILLAR LOWER GARNISH


    B227782
  1. Disengage the 2 claws and 2 clips, and remove the center pillar lower garnish LH.



6. REMOVE FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY
  1. Disconnect the connector.



    E189723
  1. Using a T30 "TORX" socket wrench, remove the bolt and front door courtesy light switch assembly.