FRONT DOOR COURTESY SWITCH > REMOVAL |
| 1. REMOVE FRONT DOOR SCUFF PLATE |
![]() |
Disengage the 10 claws and remove the front door scuff plate LH.
| 2. REMOVE REAR DOOR SCUFF PLATE |
![]() |
Disengage the 7 claws and remove the rear door scuff plate LH.
| 3. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP |
![]() |
Remove the front door opening trim weatherstrip LH.
| 4. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP |
![]() |
Remove the rear door opening trim weatherstrip LH.
| 5. REMOVE CENTER PILLAR LOWER GARNISH |
![]() |
Disengage the 2 claws and 2 clips, and remove the center pillar lower garnish LH.
| 6. REMOVE FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY |
Disconnect the connector.
![]() |
Using a T30 "TORX" socket wrench, remove the bolt and front door courtesy light switch assembly.