SIDE TURN SIGNAL LIGHT ASSEMBLY > INSTALLATION |
| 1. INSTALL SIDE TURN SIGNAL LIGHT ASSEMBLY |
![]() |
Install the side turn signal light assembly with the 3 screws.
Connect the connector.
| 2. INSTALL OUTER MIRROR COVER |
![]() |
Engage the 7 claws to install the outer mirror cover.
| 3. INSTALL OUTER MIRROR |
w/o Mirror Heater:
![]() |
Engage the 2 guides on the upper part of the outer mirror to the outer rear view mirror.
w/ Mirror Heater:
![]() |
Connect the 2 connectors.
Engage the 2 guides on the upper part of the outer mirror to the outer rear view mirror.
![]() |
Engage the 2 claws on the lower part of the outer mirror to the outer rear view mirror as shown in the illustration.
![]() |
Push the outside part of the outer mirror assembly and tilt it as show in the illustration.