SIDE TURN SIGNAL LIGHT ASSEMBLY > REMOVAL |
| 1. REMOVE OUTER MIRROR |
![]() |
Push the outside part of the outer mirror assembly and tilt it as show in the illustration.
![]() |
Push the upper part of the mirror surface and tilt it.
| *1 | Protruding Part |
Apply protective tape as shown in the illustration.
![]() |
Using a moulding remover, disengage the 2 claws at the lower part of the outer rear view mirror, and separate the outer rear view mirror glass.
![]() |
w/o Mirror Heater:
Disengage the 2 guides at the upper part of the outer mirror
Remove the outer mirror.
![]() |
w/ Mirror Heater:
Disengage the 2 guides at the upper part of the outer mirror.
Disconnect the 2 connectors and remove the outer mirror.
| 2. REMOVE OUTER MIRROR COVER |
![]() |
Disengage the 4 claws.
![]() |
Disengage the 3 claws and remove the outer mirror cover as shown in the illustration.
| 3. REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY |
![]() |
Disconnect the connector.
Remove the 3 screws and side turn signal light assembly.