HEIGHT CONTROL SENSOR > REMOVAL |
| 1. PRECAUTION (w/ Navigation System for HDD) |
| 2. REMOVE REAR NO. 2 FLOOR BOARD |
![]() |
Disengage the 2 guides <A> as shown in the illustration.
Disengage the 3 guides <B> and remove the rear No. 2 floor board.
| 3. REMOVE REAR DECK FLOOR BOX |
Remove the rear deck floor box.
| 4. REMOVE REAR NO. 3 FLOOR BOARD |
![]() |
Disengage the 2 guides and remove the rear No. 3 floor board.
| 5. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 6. REMOVE REAR WHEEL |
| 7. REMOVE REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY |
![]() |
Disconnect the connector.
Remove the 3 bolts.
Disengage the guide and remove the rear height control sensor sub-assembly.