Home › Vehicle Exterior › LIGHTING (EXT) › TURN SIGNAL FLASHER ASSEMBLY

TURN SIGNAL FLASHER ASSEMBLY > INSTALLATION

for Preparation Click here



1. INSTALL TURN SIGNAL FLASHER ASSEMBLY (for LHD)


    E189666
  1. Connect the connector.

  1. Engage the claw to install the turn signal flasher assembly.



2. INSTALL TURN SIGNAL FLASHER ASSEMBLY (for RHD)


    E189664
  1. Connect the connector.

  1. Engage the claw to install the turn signal flasher assembly.



3. INSTALL NO. 3 SIDE DEFROSTER NOZZLE DUCT


    E189204
  1. Install the No. 3 side defroster nozzle duct with the clip.



4. INSTALL HEADUP DISPLAY (w/ Headup Display)


    E113762
  1. Install the headup display with the bolt and 2 nuts.

  1. Connect the connector.

  1. Engage the clamp.



5. INSTALL UPPER INSTRUMENT PANEL ASSEMBLY

HINT:
Refer to the procedure from Install Upper Instrument Panel Assembly (Click here).