TURN SIGNAL FLASHER ASSEMBLY > INSTALLATION |
| 1. INSTALL TURN SIGNAL FLASHER ASSEMBLY (for LHD) |
![]() |
Connect the connector.
Engage the claw to install the turn signal flasher assembly.
| 2. INSTALL TURN SIGNAL FLASHER ASSEMBLY (for RHD) |
![]() |
Connect the connector.
Engage the claw to install the turn signal flasher assembly.
| 3. INSTALL NO. 3 SIDE DEFROSTER NOZZLE DUCT |
![]() |
Install the No. 3 side defroster nozzle duct with the clip.
| 4. INSTALL HEADUP DISPLAY (w/ Headup Display) |
![]() |
Install the headup display with the bolt and 2 nuts.
Connect the connector.
Engage the clamp.
| 5. INSTALL UPPER INSTRUMENT PANEL ASSEMBLY |