Home › Vehicle Exterior › LIGHTING (EXT) › STOP LIGHT CONTROL RELAY

STOP LIGHT CONTROL RELAY > INSTALLATION

for Preparation Click here



1. INSTALL STOP LIGHT CONTROL ECU ASSEMBLY (for LHD)


    E189668
  1. Connect the connector.

  1. Engage the clamp to install the stop light control ECU assembly.



2. INSTALL STOP LIGHT CONTROL ECU ASSEMBLY (for RHD)


    E189667
  1. Connect the connector.

  1. Engage the clamp to install the stop light control ECU assembly.



3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY
  1. Connect each connector.

  1. Engage the clamp.

  1. Engage the 2 guides and claw to connect the hood lock control cable.



    B298864
  1. Engage the 6 claws and clip.

  1. Install the lower instrument panel finish panel assembly with the screw <C>.



4. INSTALL COWL SIDE TRIM SUB-ASSEMBLY


    B227764
  1. Engage the 2 clips.

  1. Install the cowl side trim board LH with the clip.



5. INSTALL FRONT DOOR SCUFF PLATE


    B227761
  1. Engage the 10 claws to install the front door scuff plate LH.