Home › Vehicle Exterior › LIGHTING (EXT) › REAR COMBINATION LIGHT ASSEMBLY

REAR COMBINATION LIGHT ASSEMBLY > REASSEMBLY

for Preparation Click here



1. INSTALL REAR COMBINATION LIGHT CLIP


    E235382
  1. Install 2 new rear combination light clips.



2. INSTALL REAR COMBINATION LIGHT GASKET


    E235381
  1. Install a new rear combination light gasket.



3. INSTALL REAR BUMPER UPPER RETAINER


    E235380
  1. Engage the claw and install the rear bumper upper retainer.



4. INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY


    E235379
  1. Connect the connector.

  1. Engage the 2 clamps to install the rear combination light socket and wire sub-assembly.



5. INSTALL BACK-UP LIGHT BULB
  1. Install the back-up light bulb to the rear combination light socket and wire sub-assembly.



    E235376
  1. Turn the rear combination light socket and wire sub-assembly with the back-up light bulb in the direction indicated by the arrow shown in the illustration to connect them as a unit.



6. INSTALL NO. 1 REAR FOG LIGHT BULB (w/ Rear Fog Light)
  1. Install the No. 1 rear fog light bulb to the rear combination light socket and wire sub-assembly.



  1. for LHD:



      E235376
    1. Turn the rear combination light socket and wire sub-assembly with the No. 1 rear fog light bulb in the direction indicated by the arrow shown in the illustration to connect them as a unit.



  1. for RHD:



      E235378
    1. Turn the rear combination light socket and wire sub-assembly with the No. 1 rear fog light bulb in the direction indicated by the arrow shown in the illustration to connect them as a unit.



7. INSTALL REAR TURN SIGNAL LIGHT BULB
  1. Install the rear turn signal light bulb to the rear combination light socket and wire sub-assembly.



    E235374
  1. Turn the rear combination light socket and wire sub-assembly with the rear turn signal light bulb in the direction indicated by the arrow shown in the illustration to connect them as a unit.



8. INSTALL REAR COMBINATION LIGHT BODY GASKET


    E235372
  1. Install a new rear combination light body gasket.