NAVIGATION ANTENNA > INSTALLATION |
| 1. INSTALL NAVIGATION ANTENNA ASSEMBLY |
Install the navigation antenna assembly with the 2 screws.

Engage the 5 clamps.
| 2. INSTALL NO. 2 HEATER TO REGISTER DUCT |
![]() |
Install the No. 2 heater to register duct with the 3 screws <C>.
| 3. INSTALL NO. 3 HEATER TO REGISTER DUCT |
![]() |
Install the No. 3 heater to register duct with the 3 screws <C>.
| 4. INSTALL UPPER INSTRUMENT PANEL ASSEMBLY |