Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION ANTENNA

NAVIGATION ANTENNA > INSTALLATION

for Preparation Click here



1. INSTALL NAVIGATION ANTENNA ASSEMBLY


  1. Install the navigation antenna assembly with the 2 screws.


    E189435

  1. Engage the 5 clamps.



2. INSTALL NO. 2 HEATER TO REGISTER DUCT


    B223505
  1. Install the No. 2 heater to register duct with the 3 screws <C>.



3. INSTALL NO. 3 HEATER TO REGISTER DUCT


    B223504
  1. Install the No. 3 heater to register duct with the 3 screws <C>.



4. INSTALL UPPER INSTRUMENT PANEL ASSEMBLY

HINT:
Refer to the procedure from Upper Instrument Panel Assembly (Click here).