Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION ANTENNA

NAVIGATION ANTENNA > REMOVAL

for Preparation Click here



1. REMOVE UPPER INSTRUMENT PANEL ASSEMBLY

HINT:
Refer to the procedure up to Remove Upper Instrument Panel Assembly (Click here).



2. REMOVE NO. 3 HEATER TO REGISTER DUCT


    B223504
  1. Remove the 3 screws <C> and No. 3 heater to register duct.



3. REMOVE NO. 2 HEATER TO REGISTER DUCT


    B223505
  1. Remove the 3 screws <C> and No. 2 heater to register duct.



4. REMOVE NAVIGATION ANTENNA ASSEMBLY


  1. Disengage the 5 clamps.


    E189435

  1. Remove the 2 screws and navigation antenna assembly.