RADIO RECEIVER > INSTALLATION |
| 1. INSTALL RADIO RECEIVER ASSEMBLY |
| 2. INSTALL NO. 2 RADIO BRACKET |
![]() |
Install the No. 2 radio bracket with the 4 bolts.
| 3. INSTALL NO. 1 RADIO BRACKET |
![]() |
Install the No. 1 radio bracket with the 4 bolts.
| 4. INSTALL RADIO RECEIVER WITH BRACKET |
Connect each connector.
![]() |
Engage the 4 claws as shown in the illustration.
![]() |
Install the radio receiver with bracket with the 4 bolts.
| 5. INSTALL UPPER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY |
![]() |
Connect the connector.
Engage the 3 claws to install the upper instrument panel finish panel sub-assembly.
| 6. INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH |
Connect the connector.
Engage the 14 claws to install the instrument cluster finish panel garnish.

| 7. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY |
![]() |
Engage the 7 claws and 2 clips to install the lower center instrument cluster finish panel sub-assembly.
| 8. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY |
![]() |
Connect each connector.
Engage the 6 claws to install the integration control and panel assembly.