Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › SECURITY INDICATOR LIGHT ASSEMBLY

SECURITY INDICATOR LIGHT ASSEMBLY > INSTALLATION

for Preparation Click here



1. INSTALL COMBINATION METER ASSEMBLY


    E113756
  1. Engage the clip.

  1. Install the combination meter assembly with the 3 screws.

  1. Engage the clamp.

  1. Connect the 3 connectors.



2. INSTALL NO. 1 HEATER TO REGISTER DUCT


    B223660
  1. Install the No. 1 heater to register duct with the 3 clips.



3. INSTALL UPPER INSTRUMENT PANEL ASSEMBLY

HINT:
Refer to the procedure from Install Upper Instrument Panel Assembly (Click here).