Home › Audio / Visual / Telematics › AUDIO / VIDEO › RADIO RECEIVER

RADIO RECEIVER > INSTALLATION

for Preparation Click here



1. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY


2. INSTALL EXTENSION MODULE (w/ Navigation System)
  1. Connect the connector to install the extension module.

  1. Connect each connector to install the navigation wire and radio cable.



3. INSTALL NO. 2 RADIO BRACKET
  1. w/o Navigation System:

    1. Install the No. 2 radio bracket with the 3 bolts.

  1. w/ Navigation System:

    1. Install the No. 2 radio bracket with the 5 bolts.



4. INSTALL NO. 1 RADIO BRACKET
  1. w/o Navigation System:

    1. Install the No. 1 radio bracket with the 3 bolts.

  1. w/ Navigation System:

    1. Install the No. 1 radio bracket with the 5 bolts.



5. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET
  1. Connect each connector.

  1. Engage the 4 claws.

  1. Install the radio and display receiver assembly with bracket with the 4 bolts.



6. INSTALL UPPER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY


    B223459
  1. Connect the connector.

  1. Engage the 3 claws to install the upper instrument panel finish panel sub-assembly.



7. INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH
  1. Connect the connector.

  1. Engage the 14 claws to install the instrument cluster finish panel garnish.



8. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


    B223456
  1. Engage the 7 claws and 2 clips to install the lower center instrument cluster finish panel sub-assembly.



9. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY


    B223453
  1. Connect each connector.

  1. Engage the 6 claws to install the integration control and panel assembly.



10. CONNECT CABLE TO AUXILIARY BATTERY NEGATIVE TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).



11. INSTALL REAR NO. 3 FLOOR BOARD


    B227791
  1. Engage the 2 guides to install the rear No. 3 floor board.



12. INSTALL REAR DECK FLOOR BOX
  1. Install the rear deck floor box.



13. INSTALL REAR NO. 2 FLOOR BOARD


    B227788E01
  1. Engage the 3 guides <A>.

  1. Engage the 2 guides <B> and install the rear No. 2 floor board as shown in the illustration.