Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › SECURITY INDICATOR LIGHT ASSEMBLY

SECURITY INDICATOR LIGHT ASSEMBLY > REMOVAL

for Preparation Click here



1. REMOVE UPPER INSTRUMENT PANEL ASSEMBLY
(Click here)


2. REMOVE NO. 1 HEATER TO REGISTER DUCT


    B223660
  1. Remove the 3 clips and the No. 1 heater to register duct.



3. REMOVE COMBINATION METER ASSEMBLY


    E113756
  1. Disconnect the 3 connectors.

  1. Disengage the clamp.

  1. Remove the 3 screws.

  1. Disengage the clip and remove the combination meter assembly.