Home › Audio / Visual / Telematics › AUDIO / VIDEO › AMPLIFIER ANTENNA

AMPLIFIER ANTENNA > INSTALLATION

for Preparation Click here



1. INSTALL AMPLIFIER ANTENNA ASSEMBLY (for Quarter Panel)
  1. Install the amplifier antenna assembly with the bolt.

  1. Connect the connector.



2. INSTALL NO. 5 ANTENNA CORD SUB-ASSEMBLY (for Quarter Panel)
  1. Engage the 4 clamps.

  1. Install the No. 5 antenna cord sub-assembly with the bolt.

  1. Connect the connector.



3. INSTALL AMPLIFIER ANTENNA ASSEMBLY (for Roof)
  1. Install the amplifier antenna assembly with the antenna nut.

    Torque:
    4.5 N*m{ 46 kgf*cm , 40 in.*lbf }

  1. Connect the connector.



4. INSTALL ROOF ANTENNA POLE SUB-ASSEMBLY


    E188484
  1. Install the roof antenna pole sub-assembly as shown in the illustration.



5. INSTALL ROOF HEADLINING ASSEMBLY
(Click here)