Home › Audio / Visual / Telematics › AUDIO / VIDEO › AMPLIFIER ANTENNA

AMPLIFIER ANTENNA > REMOVAL

for Preparation Click here



1. REMOVE ROOF HEADLINING ASSEMBLY

HINT:
Refer to the procedure up to Remove Roof Headlining Assembly (Click here).



2. REMOVE ROOF ANTENNA POLE SUB-ASSEMBLY


    E188483
  1. Remove the roof antenna pole sub-assembly as shown in the illustration.



3. REMOVE AMPLIFIER ANTENNA ASSEMBLY


    E188489
  1. Disconnect the connector.

  1. Remove the antenna nut and amplifier antenna assembly.