STEREO COMPONENT AMPLIFIER > INSTALLATION |
| 1. INSTALL STEREO COMPONENT AMPLIFIER ASSEMBLY |
| 2. INSTALL NO. 1 AMPLIFIER BRACKET |
![]() |
Install the No. 1 amplifier bracket with the 2 screws.
| 3. INSTALL NO. 2 AMPLIFIER INNER BRACKET |
![]() |
Install the No. 2 amplifier inner bracket with the 2 screws.
| 4. INSTALL NO. 2 AMPLIFIER OUTER BRACKET |
![]() |
Install the No. 2 amplifier outer bracket with the 2 screws.
| 5. INSTALL STEREO COMPONENT AMPLIFIER ASSEMBLY WITH BRACKET |
![]() |
Install the stereo component amplifier assembly with bracket with the 2 bolts.
![]() |
Engage the clamp and connect the wire harness.
Connect the connector.
| 6. INSTALL AUDIO AMPLIFIER COVER |
![]() |
Install the audio amplifier cover with the 2 clips.
| 7. INSTALL FRONT SEAT ASSEMBLY RH |
| 8. INSTALL INNER SEAT TRACK COVER RH |
| 9. INSTALL OUTER SEAT TRACK COVER RH |
| 10. INSTALL FRONT SEAT HEADREST ASSEMBLY RH |
| 11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 12. INSTALL REAR NO. 3 FLOOR BOARD |
![]() |
Engage the 2 guides to install the rear No. 3 floor board.
| 13. INSTALL REAR DECK FLOOR BOX |
Install the rear deck floor box.
| 14. INSTALL REAR NO. 2 FLOOR BOARD |
![]() |
Engage the 3 guides <A>.
Engage the 2 guides <B> and install the rear No. 2 floor board as shown in the illustration.
| 15. INSPECT FRONT SEAT ASSEMBLY |
| 16. INSPECT SRS WARNING LIGHT |
Inspect the SRS warning light (Click here).