FRONT DOOR SPEAKER > INSTALLATION |
| 1. INSTALL FRONT NO. 1 SPEAKER ASSEMBLY |
Using an air riveter or a hand riveter, install the front No. 1 speaker assembly with 4 new rivets.

| *1 | Riveter | *2 | Mandrel |
| *a | INCORRECT | - | - |
![]() |
Connect the connector.
| 2. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY |
![]() |
Engage the 9 clips and install the front door trim board sub-assembly.
Install the 2 screws.
Remove the 2 pieces of protective tape.
| 3. INSTALL COURTESY LIGHT ASSEMBLY |
Connect the connector.
![]() |
Engage the claw to install the courtesy light assembly.
| 4. INSTALL DOOR ARMREST COVER |
![]() |
Install the door armrest cover.
| 5. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side) |
Connect the connector.
![]() |
Engage the 7 claws and 3 guides, and install the power window regulator switch assembly with front door armrest base panel.
| 6. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side) |
![]() |
Connect the connector.
Engage the 7 claws and 3 guides, and install the power window regulator master switch assembly with front door armrest base panel.
| 7. INSTALL ASSIST GRIP COVER |
![]() |
Engage the 6 claws, 2 clips and 3 guides, and install the assist grip cover.
| 8. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG |
![]() |
Engage the 3 claws and install the front door inside handle bezel plug.