REAR DOOR SPEAKER > INSTALLATION |
| 1. INSTALL REAR SPEAKER ASSEMBLY |
Using an air riveter or a hand riveter, install the rear speaker assembly with 3 new rivets.

| *1 | Riveter | *2 | Mandrel |
| *a | INCORRECT | - | - |
![]() |
Connect the connector.
| 2. INSTALL REAR NO. 2 SPEAKER ASSEMBLY (for 8 Speakers) |
![]() |
Install the rear No. 2 speaker assembly with the 2 screws.
| 3. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY |
for 8 Speakers:
Connect the connector.
![]() |
Engage the 8 clips and install the rear door trim board sub-assembly.
Install the 2 screws.
Remove the protective tape.
| 4. INSTALL REAR DOOR ARMREST COVER |
![]() |
Install the rear door armrest cover.
| 5. INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR ARMREST BASE PANEL |
Connect the connector.
![]() |
Engage the 7 claws and 2 guides, and install the rear power window regulator switch assembly with rear door armrest base panel.
| 6. INSTALL DOOR ASSIST GRIP COVER |
![]() |
Engage the 6 claws, 2 clips and 3 guides, and install the assist grip cover.
| 7. INSTALL REAR DOOR INSIDE HANDLE BEZEL PLUG |
![]() |
Engage the 3 claws and install the rear door inside handle bezel plug.