Home › Audio / Visual / Telematics › AUDIO / VIDEO › MICROPHONE (w/o Sliding Roof)

MICROPHONE (w/o Sliding Roof) > INSTALLATION

for Preparation Click here



1. INSTALL TELEPHONE MICROPHONE ASSEMBLY (w/o Theft Deterrent System)


    E189438
  1. Engage the 2 claws to install the telephone microphone assembly.

  1. Connect the connector.



    E189433
  1. Install the map light base with the 6 screws.



2. INSTALL TELEPHONE MICROPHONE ASSEMBLY (w/ Theft Deterrent System)


    E189442
  1. Engage the 2 claws to install the telephone microphone assembly.

  1. Connect the connector.



    E191246
  1. Temporarily install the map light base as shown in the illustration.



    E189434
  1. Install the map light cover with the 6 screws.



3. INSTALL THEFT WARNING RADAR SENSOR (w/ Theft Deterrent System)


    B229305
  1. Install the theft warning radar sensor with the 3 screws.

  1. Engage the clamp.

  1. Connect the connector.



4. INSTALL MAP LIGHT ASSEMBLY
  1. Connect the connector.



    E189674
  1. Engage the 2 guides and 4 clips, and install the map light assembly.



5. INSTALL ROOF TOP MOULDING


    B227833
  1. Engage the 3 claws and 2 clips to install the roof top moulding.