MICROPHONE (w/o Sliding Roof) > INSTALLATION |
| 1. INSTALL TELEPHONE MICROPHONE ASSEMBLY (w/o Theft Deterrent System) |
![]() |
Engage the 2 claws to install the telephone microphone assembly.
Connect the connector.
![]() |
Install the map light base with the 6 screws.
| 2. INSTALL TELEPHONE MICROPHONE ASSEMBLY (w/ Theft Deterrent System) |
![]() |
Engage the 2 claws to install the telephone microphone assembly.
Connect the connector.
![]() |
Temporarily install the map light base as shown in the illustration.
![]() |
Install the map light cover with the 6 screws.
| 3. INSTALL THEFT WARNING RADAR SENSOR (w/ Theft Deterrent System) |
![]() |
Install the theft warning radar sensor with the 3 screws.
Engage the clamp.
Connect the connector.
| 4. INSTALL MAP LIGHT ASSEMBLY |
Connect the connector.
![]() |
Engage the 2 guides and 4 clips, and install the map light assembly.
| 5. INSTALL ROOF TOP MOULDING |
![]() |
Engage the 3 claws and 2 clips to install the roof top moulding.