Home › Vehicle Interior › SEAT BELT › REAR SEAT INNER BELT ASSEMBLY (for LH Side)

REAR SEAT INNER BELT ASSEMBLY (for LH Side) > INSTALLATION

for Preparation Click here



1. INSTALL REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH


    B221498E01
  1. Install the rear seat inner with center belt assembly LH with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

    Text in Illustration 
    *1
    Protruding Part

    NOTICE:
    Do not allow the anchor part of the rear seat inner with center belt assembly LH to overlap onto the protruding parts of the floor panel.



2. INSTALL REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH (for Buckle with Switch)


    B226686E01
  1. Install the rear seat inner with center belt assembly LH with the bolt.
    Text in Illustration 
    *1
    Protruding Part

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

    NOTICE:
    Do not allow the anchor part of the rear seat inner with center belt assembly LH to overlap onto the protruding parts of the floor panel.

  1. Engage the clamp to connect the 2 connectors.



3. INSTALL REAR SEATBACK ASSEMBLY LH (for Buckle with Switch)
  1. Place the rear seatback assembly LH in the cabin.

    NOTICE:
    Be careful not to damage the vehicle body.



    B229998
  1. Install the rear seatback assembly LH with the 2 bolts.

    Torque:
    37 N*m{ 377 kgf*cm , 27 ft.*lbf }



    B233386E01
  1. Engage the fastener.
    Text in Illustration 
    *1
    Fastener



4. INSTALL REAR SEAT HEADREST ASSEMBLY (for Buckle with Switch)


    B229995
  1. Install the rear seat headrest assembly LH as shown in the illustration.



5. INSTALL REAR SEAT CUSHION ASSEMBLY


    B229993E01
  1. Engage the 2 guides of the seat cushion to the seatback.
    Text in Illustration 
    *1
    100 mm (3.94 in.) or less
    *2
    Guide
    *3
    Hook

  1. Engage the 2 front hooks of the seat cushion to the vehicle body.

    NOTICE:
    When installing the seat cushion, make sure that the seat belt buckle is not under the seat cushion.

    HINT:
    Confirm that the seat cushion is firmly installed.