Home › Vehicle Interior › SEAT BELT › REAR SEAT INNER BELT ASSEMBLY (for LH Side)

REAR SEAT INNER BELT ASSEMBLY (for LH Side) > REMOVAL

for Preparation Click here



1. REMOVE REAR SEAT CUSHION ASSEMBLY


    B229992E01
  1. Disengage the 2 front hooks of the seat cushion from the vehicle body as shown in the illustration.
    Text in Illustration 
    *1
    100 mm (3.94 in.) or less
    *2
    Hook
    *3
    Guide

    NOTICE:
    Follow the instructions below carefully as the cushion frame deforms easily.


    1. Choose a hook to detach first. Place your hands near the hook as shown in the illustration. Then lift the seat cushion to detach the hook.

    2. Repeat the above procedure for the other hook.

  1. Disengage the 2 guides of the seat cushion from the seatback.

  1. Remove the rear seat cushion assembly.



2. REMOVE REAR SEAT HEADREST ASSEMBLY (for Buckle with Switch)


    B229994
  1. Press the headrest support button and pull up the rear seat headrest assembly LH as shown in the illustration.



3. REMOVE REAR SEATBACK ASSEMBLY LH (for Buckle with Switch)
  1. Fold the rear seatback assembly LH forward.



    B233386E01
  1. Disengage the fastener.
    Text in Illustration 
    *1
    Fastener



    B229998
  1. Remove the 2 bolts and rear seatback assembly LH.



4. REMOVE REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH


    B221497
  1. Remove the bolt and rear seat inner with center belt assembly LH.



5. REMOVE REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH (for Buckle with Switch)


    B226685
  1. Disconnect the 2 connectors and disengage the clamp.

  1. Remove the bolt and the rear seat inner with center belt assembly LH.