Home › Audio / Visual / Telematics › AUDIO / VIDEO › REAR DOOR SPEAKER

REAR DOOR SPEAKER > INSPECTION

for Preparation Click here



1. INSPECT REAR SPEAKER


E165683E28
Measure the resistance of the speaker.

Standard Resistance (for 6 Speakers):
Tester Connection
Condition
Specified Condition
1 - 2
Always
3.2 to 4.8 Ω

Standard Resistance (for 8 Speakers):
Tester Connection
Condition
Specified Condition
1 - 2
Always
3.2 to 4.8 Ω

If the result is not as specified, replace the speaker assembly.
Text in Illustration 
*1
Component without harness connected
(Rear Speaker)


2. INSPECT REAR NO. 2 SPEAKER (for 8 Speakers)
  1. With the speaker installed, check that there is no looseness or other abnormalities.

  1. Check that there is no foreign matter in the speaker, no tears on the speaker's cone part or other abnormalities.

  1. When there is a possibility that either the right or left speaker is malfunctioning, interchange the speakers and perform an inspection. If the malfunction disappears after interchanging the speakers, replace the malfunctioning speaker.

    HINT:
    Connect all connectors to the speakers when performing an inspection. If the result is not as specified, replace the speaker assembly.