Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM (for HDD)

DTC    U0073    Control Module Communication Bus OFF

for Preparation Click here


DESCRIPTION

This DTC is stored when a malfunction occurs in the CAN communication circuit.

DTC No.
DTC Detection Condition
Trouble Area
U0073
CAN bus connection error
CAN communication system

INSPECTION PROCEDURE

1.CHECK DTC
  1. Clear the DTC (Click here).

  1. Recheck for DTCs and check if the same DTC is output again.

    OK:
    No DTCs are output.



NG
GO TO CAN COMMUNICATION SYSTEM (Click here)
OK

USE SIMULATION METHOD TO CHECK (Click here)