Home › Vehicle Interior › SEAT BELT › OCCUPANT DETECTION SENSOR

OCCUPANT DETECTION SENSOR > REMOVAL

for Preparation Click here



1. REMOVE FRONT SEAT ASSEMBLY

HINT:
Use the same procedure described for the LH side (Click here).



2. REMOVE RECLINING ADJUSTER RELEASE HANDLE

HINT:
Use the same procedure described for the LH side .



3. REMOVE FRONT SEAT CUSHION SHIELD ASSEMBLY

HINT:
Use the same procedure described for the LH side .



4. REMOVE FRONT SEAT INNER BELT ASSEMBLY

HINT:
Use the same procedure described for the LH side .



5. REMOVE FRONT SEAT CUSHION INNER SHIELD

HINT:
Use the same procedure described for the LH side .



6. REMOVE FRONT SEAT CUSHION COVER WITH PAD

HINT:
Use the same procedure described for the LH side .



7. REMOVE OCCUPANT DETECTION SENSOR


    B232849
  1. Remove the 2 hog rings.



    B229846
  1. Remove the 11 hog rings and separate type front seat cushion cover.